ब्लु डायमंड/Blue-diamond

Specially for Bordo (Copper Sulphate)

Method of using Morchud to prepare Bordo mixture of 1% strength.

Dissolve 1 kg of good morchud in 10 liters of water. The concentration of this solution is usually 4.0 to 5.0

Generally mix 400 grams of active lime in 5 liters of water.

Take 85 liters of water in the tank in which Bordo mixture is to be prepared.

Morchud solution should be added to the above water with slow stirring till it reaches 7.5.

Note:

The composition of the spray mixture must have a minimum of 7.5.

Approximately 325 grams of activated lime is required for 1 kg of Morchud to prepare Bordeaux mixture.

The above bordo mixture is used for grounding and spraying.

Adjust the amount of water as needed to make bordo paste.

Bordo mixture should be used immediately after preparation. Delay in use after preparation reduces its effectiveness.